Port Indexing - HP StoreFabric SN6500B Administrator's Manual

Fabric os administrator's guide, 7.1.0 (53-1002745-02, march 2013)

Hide thumbs Also See for StoreFabric SN6500B:

Table of Contents

Port Indexing

This appendix shows how to use the switchShow command to determine the mapping among the

port index, slot/port numbers, and the 24-bit port ID (PID) on any Brocade Backbone. Enter the

switchShow command without parameters to show the port index mapping for the entire platform.

Enter the switchShow -slot command for port mapping information for the ports on the blade in a

specific slot. Include the --qsfp option to list also the QSFP number, for slots that contain core

Example of port index mapping on a CR16-4 blade in a DCX 8510-4 Backbone

This example shows the output of the switchShow command for a CR16-4 core blade in slot 3 of a

Brocade DCX 8510-4 Backbone. The leftmost column shows the unique port index. The second

and third columns show the corresponding physical slot and port numbers, respectively. The

corresponding QSFP number for the port is also shown. For a core blade, no PID exists in the

Address column.

switch:FID128:admin> switchshow -slot 3 -qsfp

switchName: switch name

switchType: 121.3

switchState: Online

switchMode: Native

switchRole: Subordinate

switchDomain: 75

switchId: fffc4b

switchWwn: 10:00:00:05:1e:4f:eb:00

zoning: ON (zoning name)

switchBeacon: OFF

FC Router: OFF

Allow XISL Use: OFF

LS Attributes: [FID: 128, Base Switch: No, Default Switch: Yes, Address Mode 0]

==========================================================================

Fabric OS Administrator's Guide

53-1002745-02

Show Quick Links

Table of Contents

Fabric os 7.1.0