Account Management And Virtual Fabrics; Supported Platforms For Virtual Fabrics; Supported Port Configurations In The Fixed-Port Switches - HP StoreFabric SN6500B Administrator's Manual

10

Account management and Virtual Fabrics

Account management and Virtual Fabrics

When user accounts are created, they are assigned a list of logical fabrics to which they can log in and
a home logical fabric (home FID). When you connect to a physical chassis, the home FID defines the
logical switch to which you are logged in by default. You can change to a different logical switch
context, as described in
When you are logged in to a logical switch, the system prompt changes to display the FID of that
switch. The following are example prompts for when you are logged in to the default logical switch
(FID = 128) and a user-defined logical switch (FID = 15):
Refer to
assigning FIDs to user accounts.

Supported platforms for Virtual Fabrics

The following platforms are Virtual Fabrics-capable:
•
•
•
•
•
•
•
•
•
Some restrictions apply to the ports, depending on the port type and blade type. The following
sections explain these restrictions.

Supported port configurations in the fixed-port switches

There are no restrictions on the ports in the Brocade 5100, 5300, 6510, 6520, and VA-40FC;
however, the following rules apply:
•
•
•
Restrictions on fixed-port switches
Brocade 7800— Although it can be divided into four logical switches, you cannot use an XISL on
this switch because a base switch is not supported on this device.
286
"Changing the context to a different logical fabric"
switch:FID128:admin>
switch:FID15:admin>
Chapter 5, "Managing User Accounts,"
Brocade 5100
Brocade 5300
Brocade 6510
Brocade 6520
Brocade 7800
Brocade VA-40FC, in Native mode only
Brocade DCX
Brocade DCX-4S
Brocade DCX 8510 family
Any port can belong to any logical switch (including the base switch and default logical switch),
with the exception that F_Ports cannot belong to the base switch.
The default logical switch can use XISLs, except on Brocade DCX or DCX-4S devices.
The default logical switch can also be a base switch.
for information about creating user accounts and
Fabric OS Administrator's Guide
on page 299.
53-1002745-02