Uploading A Configuration File In Interactive Mode - HP StoreFabric SN6500B Administrator's Manual

Before you upload a configuration file, verify that you can reach the FTP server from the switch.
Using a Telnet connection, save a backup copy of the configuration file from a logical switch to a
host computer.
Secure File Transfer Protocol (SFTP) is now an option when uploading a configuration file. SFTP is
analogous to Secure Copy Protocol (SCP). SFTP can be used for the configupload/download,
supportsave, and auto FFDC/trace upload (supportftp) commands.

Uploading a configuration file in interactive mode

1. Verify that the FTP, SFTP, or SCP service is running on the host computer.
2. Connect to the switch and log in using an account with admin permissions.
3. Enter the configUpload command. The command becomes interactive and you are prompted
4. Store a soft copy of the switch configuration information in a safe place for future reference.
Example of configUpload on a switch without Admin Domains
Example of configUpload on a switch with Admin Domains
Fabric OS Administrator's Guide
53-1002745-02
for the required information.
switch:admin> configupload
Protocol (scp, ftp, sftp, local) [ftp]: sftp
Server Name or IP Address [host]: 10.1.2.3
User Name [user]: UserFoo
Path/Filename [<home dir>/config.txt]: switchConfig.txt
Section (all|chassis|FID# [all]): chassis
username@10.1.2.3's password:
Password: <hidden>
configUpload complete
NOTE
Administrative domains other than AD255 upload a subset of information. If you want a
complete switch configuration, you must use the configUpload command while logged in to
AD255.
switch:AD5:admin> ad --select 5
switch:AD5:admin> configUpload
Protocol (scp or ftp) [ftp]:
Server Name or IP Address [host]: 10.1.2.3
User Name [user]: UserFoo
Path/Filename [<home dir>/config.txt]: /pub/configurations/config.txt
Password: <hidden>
configUpload complete: Only zoning parameters are uploaded from ad5.
Configuration file backup
8
245