HP StoreFabric SN6500B Administrator's Manual page 418

14
Working with EX_Ports
EX_Port commands
See the Fabric OS Command Reference for more details on these EX_Port -valid commands.
portCfgExPort
The portCfgExPort command sets a port to be an EX_Port, and also sets and displays EX_Port
configuration parameters (including those for encryption and compression).
Usage: portCfgExPort <action> [slot/]port
Example Setting port 47 to be an EX_Port, and displaying the port configuration parameters
switch:admin> portcfgexport 47
Admin:
State:
Pid format:
Operate mode:
Edge Fabric ID:
Preferred Domain ID:
Front WWN:
Principal Switch:
Principal WWN:
Fabric Parameters:
R_A_TOV:
E_D_TOV:
Authentication Type:
DH Group:
Hash Algorithm:
Encryption:
Compression:
Forward error correction:
Edge fabric's primary wwn:
Edge fabric's version stamp:
fcrEdgeShow
The fcrEdgeShow command displays the encryption and compression status for a switch.
Usage: fcrEdgeShow
Example Displaying the port configuration parameters for a switch
switch:admin> fcrEdgeShow
FID
------------------------------------------------------------------------------
34
ON
34
ON
EX_Port downgrade considerations
Firmware downgrading is blocked if one or more EX_Ports has the Encryption/Compression feature
enabled.
418
Port 47 info
EX-port E-port Neighbor Switch (PWWN, SWWN)
4/12 9 20:09:00:05:33:7e:e8:7c
COMPRESSION
4/13 10 20:0a:00:05:33:7e:e8:7c
COMPRESSION
enabled
OK
core(N)
Brocade Native
17
160
50:00:53:31:37:03:ee:11
8
10:00:00:05:33:13:70:3e
Auto Negotiate
10000(N)
2000(N)
DHCAP
4
SHA1
ON
ON
ON
N/A
N/A
10:00:00:05:33:7e:e8:7c
10:00:00:05:33:7e:e8:7c
Flags
ENCRYPTI
ENCRYPTI
Fabric OS Administrator's Guide
53-1002745-02