Deleting A Ti Zone; Displaying Ti Zones - HP StoreFabric SN6500B Administrator's Manual

Deleting a TI zone

Use the zone --delete command to delete a TI zone from the defined configuration. This command
deletes the entire zone; to only remove port members from a TI zone, use the zone --remove
command, as described in
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the zone --delete command.
3. Enter the cfgEnable command to reactivate your current effective configuration and enforce
Example of deleting a TI zone
To delete the TI zone bluezone, type:
Remember that your changes are not enforced until you enter the cfgEnable command.

Displaying TI zones

Use the zone --show command to display information about TI zones. This command displays the
following information for each zone:
•
•
•
•
•
If you enter the cfgShow command to display information about all zones, the TI zones appear in
the defined zone configuration only and do not appear in the effective zone configuration.
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the zone --show command.
Example displaying information about the TI zone purplezone
Fabric OS Administrator's Guide
53-1002745-02
"Modifying TI zones"
zone --delete name
You can delete multiple zones by separating the zone names with a semicolon and enclosing
them in quotation marks.
the TI zones.
cfgenable "current_effective_configuration"
switch:admin> zone --delete bluezone
Zone name
E_Port members
N_Port members
Configured status (the latest status, which may or may not have been activated by cfgEnable)
Enabled status (the status that has been activated by cfgEnable)
zone --show [ name ] [-ascending]
switch:admin> zone --show purplezone
Defined TI zone configuration:
TI Zone Name: redzone:
Port List: 1,2; 1,3; 3,3; 4,5
Configured Status: Activated / Failover-Enabled
Enabled Status: Activated / Failover-Enabled

Deleting a TI zone

on page 367.
12
369