Displaying Trunking Information - HP StoreFabric SN6500B Administrator's Manual

1. Connect to the switch and log in using an account assigned to the admin role.
2. Enter the portCfgTrunkPort command to disable trunking on a port.

Displaying trunking information

You can use the trunkShow command to view the following information:
•
•
•
•
•
Use the portPerfShow command to monitor problem areas where there are congested paths or
dropped links, to determine whether you need to adjust the fabric design by adding, removing, or
reconfiguring ISLs and trunking groups. For additional information on using the Brocade Advanced
Performance Monitor to monitor traffic, see
To view detailed information about F_Port trunking, see
page 549.
Use the following procedure to view trunking information:
1. Connect to the switch and log in using an account assigned to the admin role.
2. Enter the trunkShow command.
Fabric OS Administrator's Guide
53-1002745-02
Enter the switchCfgTrunk command to disable trunking on all ports on the switch.
Mode 1 enables and mode 0 disables trunking.
switch:admin> switchcfgtrunk 0
All the trunks and members of a trunk.
Whether the trunking port connection is the master port connection for the trunk group.
Whether trunks are formed correctly.
Trunking information for a switch that is part of an FC router backbone fabric interlinking
several edge fabrics.
Trunking information, including bandwidth and throughput for all the trunk groups in a switch.
This example shows trunking groups 1, 2, and 3; ports 4, 13, and 14 are masters.
switch:admin> trunkshow
1: 6-> 4 10:00:00:60:69:51:43:04
2: 15-> 13 10:00:00:60:69:51:43:04
12-> 12 10:00:00:60:69:51:43:04
14-> 14 10:00:00:60:69:51:43:04
13-> 15 10:00:00:60:69:51:43:04
3: 24-> 14 10:00:00:60:69:51:42:dd
This example shows trunking information along with the bandwidth and throughput for all the
trunk groups in a switch.
switch:admin> trunkshow -perf
1: 2-> 2 10:00:00:05:1e:81:56:8b
3-> 3 10:00:00:05:1e:81:56:8b
Tx: Bandwidth 4.00Gbps, Throughput 1.66Gbps (48.45%)
Rx: Bandwidth 4.00Gbps, Throughput 1.66Gbps (48.44%)
Tx+Rx: Bandwidth 8.00Gbps, Throughput 3.33Gbps (48.44%)
2: 5->113 10:00:00:05:1e:46:42:01
4->112 10:00:00:05:1e:46:42:01
Tx: Bandwidth 16.00Gbps, Throughput 1.67Gbps (12.12%)
Displaying trunking information
Chapter 20, "Monitoring Fabric
"Displaying F_Port trunking information"
99 deskew 15 MASTER
99 deskew 16 MASTER
99 deskew 15
99 deskew 17
99 deskew 16
2 deskew 15 MASTER
1 deskew 15 MASTER
1 deskew 17
3 deskew 15 MASTER
3 deskew 15
22
Performance".
on
539