HP StoreFabric SN6500B Administrator's Manual page 65

Setting the static addresses for the Ethernet network interface
Use the following procedure to set the Ethernet network interface static addresses:
1. Connect to the switch and log in using an account assigned to the admin role.
2. Perform the appropriate action based on whether you have a switch or Backbone:
3. Enter the network information in dotted-decimal notation for the Ethernet IPv4 address or in
4. Enter the Ethernet Subnetmask at the prompt.
5. The Fibre Channel prompts are not relevant; you can skip them by pressing Enter.
6. Enter the Gateway Address at the prompt.
7.
Setting the static addresses for the chassis management IP interface
Use the following procedure to set the chassis management IP interface static addresses:
1. Connect to the switch and log in using an account assigned to the admin role.
2. Enter the ipAddrSet -chassis command.
3. Enter the network information in dotted-decimal notation for the Ethernet IPv4 address or in
4. Enter the Ethernet Subnet mask at the prompt.
Fabric OS Administrator's Guide
53-1002745-02
•
If you are setting the IP address for a switch, enter the ipAddrSet command.
•
If you are setting the IP address for a Backbone, enter the ipAddrSet command specifying
either CP0 or CP1. You must set the IP address for both CP0 and CP1.
Example of setting an IPv4 address
switch:admin> ipaddrset
Ethernet IP Address [10.1.2.3]:
Ethernet Subnetmask [255.255.255.0]:
Fibre Channel IP Address [220.220.220.2]:
Fibre Channel Subnetmask [255.255.0.0]:
Gateway IP Address [10.1.2.1]:
DHCP [OFF]: off
Example of setting an IPv6 address on a switch
switch:admin> ipaddrset -ipv6 --add 1080::8:800:200C:417A/64
IP address is being changed...Done.
For more information on setting up an IP address for a Virtual Fabric, refer to
"Managing Virtual Fabrics".
semicolon-separated notation for IPv6.
The Fibre Channel IP address is used for management.
Disable DHCP by entering off.
switch:admin> ipaddrset -chassis
Ethernet IP Address [192.168.166.148]:
Ethernet Subnetmask [255.255.255.0]:
Committing configuration...Done.
semicolon-separated notation for IPv6.
The switch Ethernet interface
Chapter 10,
2
65