Port Configuration; Table 26 Access Defaults; Table 27 Port Information - HP StoreFabric SN6500B Administrator's Manual

TABLE 26
Devices
Switch access
Zoning

Port configuration

Table 27
various policies, take into consideration firewalls and other devices that may sit between switches
in the fabric and your network or between the managers and the switch.
TABLE 27
Port
22
23
80
111
123
161
443
512
513
514
897
Fabric OS Administrator's Guide
53-1002745-02
Access defaults (Continued)
Access default
All devices can access the management server.
Any device can connect to any FC port in the fabric.
Any switch can join the fabric.
All switches in the fabric can be accessed through a serial port.
No zoning is enabled.
provides information on ports that the switch uses. When configuring the switch for
Port information
Type Common use Comment
TCP SSH, SCP
TCP Telnet Use the ipfilter command to block the port.
TCP HTTP Use the ipfilter command to block the port.
UDP sunrpc This port is used by Platform API. Use the ipfilter command to block the port.
UDP NTP
UDP SNMP Disable the SNMP service on the remote host if you do not use it, or filter
incoming UDP packets going to this port.
TCP HTTPS Use the ipfilter command to block the port.
TCP exec
TCP login
TCP shell
TCP This port is used by the Platform API.
Ports and applications used by switches
6
193