HP StoreFabric SN6500B Administrator's Manual page 415

FCR:admin> portcfgexport 1
Admin:
State:
Pid format:
Operate mode:
Edge Fabric ID:
Front Domain ID:
Front WWN:
Principal Switch:
Principal WWN:
Fabric Parameters:
R_A_TOV:
E_D_TOV:
Authentication Type:
DH Group:
Hash Algorithm:
Encryption:
Compression:
Forward Error Correction:
Edge fabric's primary wwn:
Edge fabric's version stamp:
Example Configuring the 'edge' switch to use DH-CHAP protocol for authentication, setting the DH group to
group 4, and activating switch authentication
edge:admin> authutil --show
AUTH TYPE HASH TYPE GROUP TYPE
----------------------------------------
fcap,dhchap sha1,md5 0,1,2,3,4
Switch Authentication Policy: PASSIVE
Device Authentication Policy: OFF
edge:admin> authutil --set -a dhchap
edge:admin> authutil --set -g 4
edge:admin> authutil --policy -sw active
Warning: Activating the authentication policy requires either DH-CHAP secrets or
PKI certificates depending on the protocol selected. Otherwise, ISLs will be
segmented during next E-port bring-up.
ARE YOU SURE (yes, y, no, n): [no] y
Auth Policy is set to ON
edge:admin>
edge:admin> authutil --show
AUTH
--------------------------------------
dhchap
Switch Authentication Policy: ON
Device Authentication Policy: OFF
edge:admin>
Example Setting a secret key
NOTE
For this you need the WWN of the front phantom switch. Use portCfgExPort EX_Port# on that switch
to learn its wwn value.
edge:admin> secauthsecret --set
This command is used to set up secret keys for the DH-CHAP authentication.
The minimum length of a secret key is 8 characters and maximum 40
Fabric OS Administrator's Guide
53-1002745-02
Port 1 info
TYPE HASH TYPE GROUP TYPE
md5 4
enabled
OK
core(N)
Brocade Native
20
160
50:00:53:31:37:43:ee:14
8
10:00:00:05:33:13:70:3e
Auto Negotiate
10000(N)
2000(N)
None
N/A
N/A
OFF
OFF
OFF
N/A
N/A
Working with EX_Ports
14
415