Deleting A Frame Redirect Zone; Viewing Frame Redirect Zones - HP StoreFabric SN6500B Administrator's Manual

Example of creating a frame redirect zone
The following example creates a redirect zone, given a host (10:10:10:10:10:10:10:10), target
(20:20:20:20:20:20:20:20), virtual initiator (30:30:30:30:30:30:30:30), and virtual target
(40:40:40:40:40:40:40:40):

Deleting a frame redirect zone

Use the following procedure to delete a frame redirect zone:
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the zone
3. Enter the cfgSave command to save changes to the defined configuration.
Example of deleting a frame redirect zone

Viewing frame redirect zones

Use the following procedure to view frame redirect zones:
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the cfgShow command.
Fabric OS Administrator's Guide
53-1002745-02
switch:admin>zone --rdcreate 10:10:10:10:10:10:10:10 20:20:20:20:20:20:20:20 \
30:30:30:30:30:30:30:30 40:40:40:40:40:40:40:40 restartable noFCR
rdDelete command to remove the base redirect zone object,
--
"red_______base".
NOTE
When the base zone is removed, the redirect zone configuration "r_e_d_i_r_c__fg" is removed
as well.
switch:admin> zone --rddelete \
red_0917_10_10_10_10_10_10_10_10_20_20_20_20_20_20_20_20
Frame Redirection
4
131