Performance Data Collection - HP StoreFabric SN6500B Administrator's Manual

20

Performance data collection

1. Connect to the switch and log in using an account with admin permissions.
2. Enter one of the following commands, depending on the action you want to perform:
Performance data collection
Data collected through Advanced Performance Monitoring is deleted when the switch is rebooted.
Using the Brocade Network Advisor Enterprise Edition, you can store performance data persistently.
For details on this feature, refer to the Brocade Network Advisor User Manual.
516
•
To save the current EE monitor and frame monitor configuration settings into nonvolatile
memory, use the perfCfgSave command.
switch:admin> perfcfgsave
This will overwrite previously saved Performance Monitoring
settings in FLASH. Do you want to continue? (yes, y, no, n): [no] y
Please wait ...
Performance monitoring configuration saved in FLASH.
•
To restore a saved monitor configuration, use the perfCfgRestore command, for example
to restore the original performance monitor configuration after making several changes.
switch:admin> perfcfgrestore
This will overwrite current Performance Monitoring settings in RAM. Do you
want to continue? (yes, y, no, n): [no] y
Please wait... Performance monitoring configuration restored from FLASH
ROM.
•
To clear the previously saved performance monitoring configuration settings from
nonvolatile memory, use the perfCfgClear command.
switch:admin> perfcfgclear
This will clear Performance Monitoring settings in FLASH. The RAM settings
won't change. Do you want to continue? (yes, y, no, n): [no] y
Please wait... Committing configuration...done.
Performance Monitoring configuration cleared from FLASH.
Fabric OS Administrator's Guide
53-1002745-02