Log File Locations; Changing Communications Port Numbers - HP Data Protector A.06.11 User Manual

Log file locations

Windows:
nl
Log files for DMComms are found at: <Your DMComms Installed Location>\
DMComms\log\...
For example: c:\Program Files\HP\DataMgt\DMComms\log\
mv_comms.log.0
HP-UX, Linux and Solaris:
nl
Log files for DMComms are found at two locations: /var/opt/hpdmcomms/log/
mv_comms.log.0
nl
/var/opt/hpdmcomms/log/daemon.log

Changing communications port numbers

Default port numbers used by the Media Operations communications service are
25555 and 25556. All communications over the network between Media Operations
components use an HTTPS/XML format. If you need to change the port numbers (for
example, if another application uses the same port numbers), proceed as follows:
1. Go to the directory containing the communications configuration file ( in the
config directory of DMComms). The default installation location is:
• Windows: C:\Program.
• HP-UX, Linux and Solaris: /etc/opt/hpdmcomms/config.
2.
Edit the bbc_config file to change the port settings. There are two port numbers,
one for HTTP-based RPC communications, the other for HTTP-based data transfer
communications. Each port number is set in both the Communications Client and
Communications Server sections of this file:
[com.hp.ov.bbc.fx] section
SERVER_PORT = 25555
[com.hp.ov.dm.ipcclient.fx] section
SERVER_PORT = 25555
[com.hp.ov.ipcserver] section
SERVER_PORT = 25556
[com.hp.ov.dm.ipcclient.rpc] section
SERVER_PORT = 25556
User guide 163