HP StoreFabric SN6500B Administrator's Manual page 605

You can monitor FC router resources using the fcrResourceShow command. The fcrResourceShow
command shows FCR resource limits and usage and includes the following:
•
•
•
•
•
•
The following example shows the use of the fcrResourceShow command to display physical port
(EX_Port) resources.
Fabric OS Administrator's Guide
53-1002745-02
LSAN zones and LSAN devices — The information shows the maximum versus the currently
used zones and device database entries. Each proxy or physical device constitutes an entry. If
LSAN zones are defined in two edge fabrics, they are counted as two and not one. One device
imported into multiple edge fabrics counts multiple times.
The default maximum number of LSAN zones is 3000. Refer to
count" on page 594 for information on changing this limit.
Proxy Device Slots — The physical and proxy devices use the 10,000 device slots.
The information shows the maximum pool size for translate phantom node and port WWNs and
shows the number of translate node and port WWNs from this pool.
Phantom Node WWNs
Phantom Port WWNs
Max proxy devices
Max NR_Ports
switch:admin> fcrresourceshow
Daemon Limits:
LSAN Zones:
LSAN Devices:
Proxy Device Slots:
Phantom Node WWN:
Phantom Port WWN:
Port Limits:
Max proxy devices:
Max NR_Ports:
Currently Used(column 1: proxy, column 2: NR_Ports):
0 | 0
1 | 3
4 | 0
5 | 0
6 | 0
7 | 0
8 | 6
9 | 6
10 | 6
11 | 6
12 | 6
13 | 6
14 | 6
15 | 6
16 | 8
17 | 8
18 | 8
19 | 8
Max Allowed Currently Used
-------------------------------
3000
10000
10000
WWN Pool Size
---------------------------------
8192
32768
2000
1000
34
34
0
0
0
0
34
34
34
34
34
34
34
34
34
34
34
34
Resource monitoring
"Setting the maximum LSAN
28
51
20
Allocated
5413
16121
24
605