HP StoreFabric SN6500B Administrator's Manual page 586

24
Inter-fabric link configuration
10. Enter the switchShow command to verify the EX_Port (or VEX_Port), edge fabric ID, and name
11. Enter the fcrFabricShow command to view any edge fabric switch names and ensure links are
586
Edge fabric's primary wwn: N/A
Edge fabric's version stamp: N/A
portDisableReason: None
portCFlags: 0x1
portFlags: 0x1 PRESENT U_PORT EX_PORT
portType: 10.0
portState: 2 Offline
portPhys: 2 No_Module
portScn: 0
port generation number:
portId: 014a00
portIfId: 4372080f
portWwn: 20:4a:00:60:69:e2:03:86
portWwn of device(s) connected:
Distance: normal
portSpeed: N4Gbps
LE domain: 0
FC Fastwrite: ON
Interrupts: 0
Unknown: 0
Lli: 0
Proc_rqrd: 0
Timed_out: 0
Rx_flushed: 0
Tx_unavail: 0
Free_buffer: 0
Overrun: 0
Suspended: 0
Parity_err: 0
2_parity_err: 0
CMI_bus_err: 0
Port part of other ADs: No
of the edge fabric switch (containing the E_Port or VE_Port) are correct.
working as expected.
NOTE
The fcrFabricShow command displays the static IPv6 addresses for each FC router and each
edge fabric switch connected to the EX_Ports.
switch:admin> fcrfabricshow
FCR WWN: 10:00:00:05:1e:13:59:00, Dom ID: 2, Info: 10.32.156.52
1080::8:800:200C:1234/64,"Spirit-2"
"fcr_5300"
EX_Port FID Neighbor Switch Info (WWN, enet IP, name)
---------------------------------------------------------------
7 10 10:00:00:05:1e:34:11:e5 10.32.156.33 "5300" 1080::8:8FF:FE0C:417A/64
4 116 10:00:00:05:1e:37:00:44 10.32.156.34 "5300"
FCR WWN: 10:00:00:05:1e:12:e0:00, Dom ID: 100, Info:10.32.156.50
1080::8:60F:FE0C:456A/64
"fcr_5300"
EX_Port FID Neighbor Switch Info (WWN, enet IP, name)
0
Link_failure: 0
Loss_of_sync: 0
Loss_of_sig: 2
Protocol_err: 0
Invalid_word: 0
Invalid_crc: 0
Delim_err: 0
Address_err: 0
Lr_in: 0
Lr_out: 0
Ols_in: 0
Ols_out: 0
Frjt : 0
Fbsy : 0
Fabric OS Administrator's Guide
53-1002745-02