Displaying Controller Information - HP D5970A - NetServer - LCII Installation And User Manual

Chapter 5
NOTE Right-clicking the mouse on a Logical Drive highlights its
associated physical drives.

Displaying Controller Information

The Display Controller Information window is accessed from the Administration
menu. You may also use its icon, as shown in Figure 5-6:
Figure 5-6. Selecting Display Controller Information
The following information is displayed in the Controller Information window:
The controller model of this controller
If an Intelligent BBU (Battery Backup Unit) is installed (N/A for not
supported on the current controller)
The firmware and BIOS versions residing on the controller
The cache size and Flash ROM size
If the controller is part of a dual active (fault tolerant) pair
The number of ports on this controller
The bus width (for data transfers) and bus speed (MB/sec)
The bus type (SCSI, Fibre) and number of channels on the controller
The number of physical devices installed and the maximum number of
physical devices this controller can hold
Monitoring
101