Linux Installation: Initial; Installation Wizard: Add Eva Management Account - HP 2000fc User Manual

Figure 4

Installation wizard: Add EVA Management Account

8. Before installation can proceed, you must add a user account to the HP Storage Admin user group.
(This step is not necessary for MSA storage.) Choose one of the following options:
• If you do not already have any user accounts set up, create a user account now by completing the
User name, Password, and Confirm Password boxes. Then click Create User and Add to Group.
• If you already have one or more user accounts set up (for example, you may have set up accounts
when you installed your EVA), select one to add to the HP Storage Admin group. Then click Add To
Group.
When prompted, enter a password for the existing user account, and then click OK.
The selected user is added to the HP Storage Admin group and the Add EVA Management Account
dialog box closes.
The message, "Your installation is complete," is displayed.
Or, if any software components fail to install, the final installation window lists those components.
9. Click the View Error Log link to open an error log that provides additional information. You may be
prompted to upgrade, add, or modify components for successful installation.
10. Remove the Simple SAN Connection Manager CD, and then click Reboot.
1 1. Restart your computer to complete the installation process.
12. When you restart your computer, the system may report finding new hardware. If so, respond to these
messages by clicking Cancel.
Repeat this procedure to install the software on additional Windows servers.

Linux installation: initial

Follow these steps to install the required software on servers running Linux.
NOTE: To configure servers using other operating systems or non-QLogic HBAs, see
SAN Connection Manager for HP-UX and Emulex HBAs"
18 Installing, upgrading, and removing Simple SAN Connection Manager
on page 20.
"Configuring Simple