Adding And Removing Fabric Assist Zone Members; Modifying The Members Of A Fabric Assist Zone; Renaming A Fabric Assist Zone; Deleting A Fabric Assist Zone - HP StorageWorks 2/64 - Core Switch Administrator's Manual

7. Select an element in the Member Selection List that you want to include in your zone.
The Add Member button becomes active.
8. Click Add Member to add the zone member.
The selected member is moved to the Zone Members window.
9. Optional: Repeat
10.Optional: Click Add Other to include a WWN, port, or QuickLoop (AL_PA) that is not currently a part
of the fabric.
11.Optional: Click Add Other Host to include a WWN, port, or QuickLoop (AL_PA) that is not currently a
part of the fabric.
The new members appear in the Fabric Assist Members area. The newly created FA zone also is
displayed in the Config tab.

Adding and removing Fabric Assist zone members

Use the following procedure to add and remove FA zone members.

Modifying the members of a Fabric Assist zone

1. Launch the Zone Admin module as described on
2. Click the Fabric Assist tab.
3. Select the FA zone you want to modify from the Name drop-down list.
4. Click an element in the Member Selection List that you want to include in your FA zone, or click an
element in the FA Zone Members that you want to delete.
5. Click Add Member to add an FA zone member, or click Remove Member to remove an FA zone
member.

Renaming a Fabric Assist zone

Use the following procedure to change the name of an FA zone.
1. Launch the Zone Admin module as described on
2. Click the Fabric Assist tab.
3. Select the FA Zone you want to rename from the Name drop-down list.
4. Click Rename.
The Rename a Fabric Assist Zone dialog box opens.
5. Enter a new FA zone name and click OK.
The FA zone is renamed in the Zone Admin buffer.

Deleting a Fabric Assist zone

Use the following procedure to delete an FA zone.
1. Launch the Zone Admin module as described on
2. Click the Fabric Assist Zone tab.
3. Select the FA zone you want to delete from the Name drop-down list.
4. Click Delete.
The Confirm Deleting Fabric Assist Zone dialog box opens.
5. Click Yes.
The selected FA zone is deleted from the Zone Admin buffer.

Managing zone configurations

A zone configuration is a group of zones; zoning is enabled on a fabric by enabling a specific
configuration. You can specify members of a configuration using the following methods:
• Zone names
• QuickLoop names
• FA zone names
step 7 and step 8 to add more elements to your FA zone.
page 83.
page 83.
page 83.
Fabric OS 5.x Advanced Web Tools administrator guide 91