Adding Secure Fabric Os To The Fabric - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Adding Secure Fabric OS to the Fabric

Adding Secure Fabric OS to the Fabric
To implement Secure Fabric OS in a fabric, each switch in the fabric must have
the following:
The following steps are required to set up a fabric for use with Secure Fabric OS:
Note:
policies, they may segment from the fabric.
22
A compatible version of Fabric OS
An activated Secure Fabric OS security license
An activated Zoning license (zoning is essential to Secure Fabric OS
mechanisms)
The required PKI objects
A digital certificate
Identify the versions of Fabric OS currently installed on each switch and
determine which switches require upgrading to support Secure Fabric OS.
Instructions are provided under
Fabric OS" on page 23.
For each switch that was shipped with Fabric OS v3.1.x or v4.1.x installed,
follow the instructions provided under
Shipped with Fabric OS v3.1.x or
For each switch that must be upgraded for use with Secure Fabric OS, follow
the instructions provided under
Require Upgrading" on page 27.
For the HP StorageWorks Core Switch 2/64 with any version of Fabric OS
v4.x, follow the instructions provided under
Core Switch 2/64" on page 41.
Install a supported CLI client on each computer workstation that you intend to
use to access the fabric. Instructions are provided under
Supported CLI Client on a Computer
If one or more switches are not capable of enforcing the Secure Fabric OS
"Identifying the Current Version of
"Adding Secure Fabric OS to Switches
v4.1.x" on page 24.
"Adding Secure Fabric OS to Switches that
"Adding Secure Fabric OS to a
Workstation" on page 45.
Secure Fabric OS Version 1.0 User Guide
"Installing a