Removing A Temporary Password From A Switch - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Removing a Temporary Password from a Switch

You can use the sectemppasswdreset command to remove the temporary
password. The regular password remains in effect.
To remove the temporary password from a switch:
1. From a sectelnet or SSH session, log into the Primary FCS switch as Admin.
2. Enter the following:
switch:admin> sectemppasswdreset 2, "admin"
Committing configuration.....done
Password successfully reset on domain 2 for admin
switch:admin>
Secure Fabric OS Version 1.0 User Guide
sectemppasswdreset domain, login_name
Where:
domain is the Domain ID of the switch for which you want to remove
the temporary password.
login_name is the login account to which the temporary password
applies.
You can enter the command with no parameters to reset all temporary
passwords in the fabric.
Example, removing a temporary password for the Admin account from a
switch that has a Domain ID of 2.
Managing Secure Fabric OS
99