Displaying Status Of Secure Mode; Secure Mode Information - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Managing Secure Fabric OS
primaryfcs:admin> secPolicyshow "active","FCS_POLICY"
____________________________________________________
FCS_POLICY
Pos Primary
__________________________________________________
1 Yes
____________________________________________________
primaryfcs:admin>

Displaying Status of Secure Mode

You can use the secmodeshow command to determine whether Secure Mode
is enabled.
To determine whether Secure Mode is enabled:
1. From a sectelnet or SSH session, to the Primary FCS switch and log in as
2. Enter the secmodeshow command.
primaryfcs:admin> secmodeshow
Secure Mode: ENABLED.
Version Stamp: 10354, Thu Oct
Pos Primary
=================================================
1 Yes
2 No
primaryfcs:admin>
Table 14
Table 14: Secure Mode Information
Column Heading
Pos
Primary
88
ACTIVE POLICY SET
WWN
10:00:00:60:69:30:15:5c
Admin.
The command displays the status of Secure Mode, the version number and
time stamp, and the list of switches in the FCS policy.
Example:
WWN
10:00:00:60:69:11:fc:53
10:00:00:60:69:11:fc:55
identifies the information that displays if Secure Mode is enabled.
Position of switch in FCS list
"Yes" if switch is Primary FCS, "no" if not.
DId swName
1 primaryfcs
4 10:23:32 2001.
DId swName
2 primaryfcs.
1 backupswitch.
Indicates
Secure Fabric OS Version 1.0 User Guide