Adding Secure Fabric Os To The Fabric - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Adding Secure Fabric OS to
the Fabric
Secure Fabric OS is supported by Fabric OS v2.6.1, v3.1.x, and v4.1.x, and can be
added to fabrics that contain any combination of these versions. The procedure for
adding Secure Fabric OS to a switch depends on whether the switch is shipped
with one of these versions installed or requires upgrading.
The following switches can be upgraded for use with Secure Fabric OS:
This chapter provides the following information:
Secure Fabric OS Version 1.0 User Guide
StorageWorks 1 Gb SAN switches running Fabric OS v2.3+ to v2.6.1
StorageWorks 2 Gb SAN switches running Fabric OS v3.0+ to v3.1.x
Core Switch 2/64 or SAN Switch 2/32 switches running Fabric OS v4.0+ to
v4.1.x
Adding Secure Fabric OS to the
Identifying the Current Version of Fabric
Adding Secure Fabric OS to Switches Shipped with Fabric OS v3.1.x or
v4.1.x, page 24
Adding Secure Fabric OS to Switches that Require
Adding Secure Fabric OS to a Core Switch
Installing a Supported CLI Client on a Computer
Fabric, page 22
OS, page 23
Upgrading, page 27
2/64, page 41
Workstation, page 45
2
21