Creating Secure Fabric Os Policies - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Creating Secure Fabric OS
Policies
You can use the Secure Fabric OS policies to customize access to the fabric. The
FCS policy is the only required policy; all other policies are optional.
Implementing Secure Fabric OS policies involves the following steps:
This chapter provides the following information:
Secure Fabric OS Version 1.0 User Guide
Determining which trusted switch you want to use to manage Secure
Fabric OS. This switch should be in a physically secure area.
Enabling Secure Mode in the fabric, and specifying the trusted switch and one
or more backup trusted switches. This automatically creates the FCS policy.
Determining which additional Secure Fabric OS policies you would like to
implement in the fabric, then creating and activating those policies. To ensure
the desired access, you must create an access policy for each management
channel that you intend to use.
Verifying that the Secure Fabric OS policies you have created are operating as
you intend. Testing a variety of scenarios to verify optimal policy settings is
recommended. For troubleshooting information, see "Troubleshooting" on
page 106.
Default Fabric and Switch
Enabling Secure Mode, page 49
Modifying the FCS
Creating Secure Fabric OS Policies Other Than the FCS
Managing Secure Fabric OS
Accessibility, page 48
Policy, page 54
Policies, page 76
3
Policy, page 58
47