Moving Switches Between Fabrics - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Managing Secure Fabric OS
Table 17: Moving Switches Between Fabrics
Switch
Has Secure Forms a one-switch
Mode enabled fabric with Secure
and is Primary Mode enabled,
FCS. and acts as
Primary.
Has Secure Forms a one-switch
Mode enabled fabric with Secure
and is Backup Mode enabled,
FCS. and acts as
Primary.
Has Secure Forms a one-switch
Mode enabled fabric with Secure
and is Mode enabled but
Non-FCS. with no FCS switch
(enter
secmodeenable
to specify Primary
FCS).
Has Secure Standard
Mode disabled. operation.
102
If moved into a
fabric that has
If set up as a enabled but no
standalone
switch:
Segments unless
FCS policies are
identical. If policies
are identical,
switch becomes
Primary FCS.
Segments unless
FCS policies are
identical. If policies
are identical,
switch becomes
Primary FCS.
Segments; cannot
join fabric until a
Primary FCS is
available (enter
secmodeenable
to specify Primary
FCS).
Segments from
fabric.
If moved into a
fabric that has
Secure Mode
enabled and a
FCS switches
available:
Segments unless
FCS policies are
identical. If policies
are identical, switch
is Primary FCS
unless other FCS
switch is higher in
the policy.
Segments unless
FCS policies are
identical. If policies
are identical, switch
is Backup FCS.
Segments unless
FCS policies are
identical. If policies
are identical, switch
is Non-FCS.
Segments from
fabric.
Secure Mode
If moved into
functioning a non-secure
Primary FCS:
Segments from
fabric.
Segments from
fabric.
Segments from
fabric.
Standard
operation.
Secure Fabric OS Version 1.0 User Guide
fabric: