Verifying Or Activating The Secure Fabric Os And Zoning Licenses - HP StorageWorks MSA 2/8 - SAN Switch User Manual

To log in and change the passwords:
1. Open a CLI connection (serial or telnet) to the switch.
2. Log into the switch as Admin. The default password is password.
3. Change all the passwords to secure passwords, using between 8 and 40
Note:
require significant effort and result in fabric downtime.

Verifying or Activating the Secure Fabric OS and Zoning Licenses

The Secure Fabric OS and Zoning features are included in the Fabric OS and can
be activated by entering a corresponding license key, available from HP. You must
activate the licenses on each switch for which you want to implement Secure
Fabric OS.
You can activate a license through the CLI or through Web Tools. This section
provides CLI instructions only. For instructions on activating a license through
Web Tools, refer to the HP StorageWorks Web Tools Version 3.1.x/4.1.x User
Guide.
To verify or activate a software license through the CLI:
1. Open a CLI connection (serial or telnet) to the switch.
2. Log into the switch as Admin. The default password is password.
3. Enter the licenseshow command to determine whether the license is
Secure Fabric OS Version 1.0 User Guide
The firmware prompts you to change all passwords.
alphanumeric characters for each password, with a different password for
each account.
The new passwords must be different from the default values.
Record the passwords and store in a secure place. Recovering passwords can
already activated.
A list of all the activated licenses displays. The Secure Fabric OS license
displays as Security license.
Adding Secure Fabric OS to the Fabric
25