HP StorageWorks MSA 2/8 - SAN Switch User Manual page 32

Adding Secure Fabric OS to the Fabric
3. Type 1 to select CSR retrieval and press Enter.
PKI CERTIFICATE INSTALLATION UTILITY 1.0.1
Choose a method for providing fabric addresses
1) Manually enter fabric address
2) Read addresses from a file (name to be given)
q) Quit PKI Certificate installation utility
Enter choice> 1
4. Specify the desired method for entering the fabric addresses:
32
The utility prompts for the method of specifying fabric addresses.
Example:
To manually enter the fabric address:
a. Type 1 and press Enter.
The utility prompts for the IP address or switch name of a switch in the
fabric. Only one switch name or IP address is required for each fabric.
b. Type the IP address or switch name of one of the switches in the fabric
and press Enter.
You must insert at least one valid IP address to continue, and the
corresponding switch must be operating and available.
c. When you are done entering IP addresses, press Enter again to end the
list.
To read the fabric addresses from a file:
a. Type 2 and press Enter.
The utility prompts for the path and filename of the file. The addresses in
the file must be IP addresses or switch names, each on a separate line.
b. Type the path and filename of the file that contains the fabric addresses
and press Enter.
The utility prompts for the path and filename of the CSR file you want to
create.
Secure Fabric OS Version 1.0 User Guide