HP StorageWorks MSA 2/8 - SAN Switch User Manual page 87

To display information about a specific Secure Fabric OS policy:
1. From a sectelnet or SSH session, log into the Primary FCS switch as Admin.
2. Enter the following:
primaryfcs:admin> secpolicyshow "defined"
____________________________________________________
FCS_POLICY
Pos Primary
__________________________________________________
1 Yes
HTTP_POLICY
IpAddr
__________________________________________________
192.155.52.0
192.155.53.1
192.155.54.2
192.155.55.3
192.155.56.4
____________________________________________________
primaryfcs:admin>
Secure Fabric OS Version 1.0 User Guide
secpolicyshow listtype, policy_name
Where:
listtype is the type of Secure Fabric OS policy set, and can be
"Active", "Defined", or an asterisk (*), which displays both versions of
the specified policy.
policy_name is the name of the Secure Fabric OS policy. If you do
not specify a policy name, the command displays all the policies in the
specified policy set.
If you do not specify any operands, the command displays all policies in both
the Active and Defined Policy Sets.
Example, showing all the policies in the Defined Security Policy Set.
DEFINED POLICY SET
WWN
10:00:00:60:69:30:15:5c
Showing the active version of the FCS policy.
DId swName
1 primaryfcs
Managing Secure Fabric OS
87