Viewing The Secure Fabric Os Policy Database - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Viewing the Secure Fabric OS Policy Database

You can use the secpolicydump command to display the Secure Fabric OS
policy database, which consists of the Active and Defined Security Policy Sets.
This command displays information without page breaks.
To view the Secure Fabric OS policy database:
1. From a sectelnet or SSH session, log into the Primary FCS switch as Admin.
2. Enter the following:
Secure Fabric OS Version 1.0 User Guide
secpolicydump listtype, policy_name
Where:
listtype is the type of Secure Fabric OS policy set, and can be
"Active", "Defined", or an asterisk (*), which displays both versions of
the policy. If a list type is not entered, both versions of the Secure Fabric
OS policy display.
policy_name is the name of the Secure Fabric OS policy. If you do
not specify a policy name, the command displays all the policies in the
specified policy set.
If you do not specify any operands, the command displays all policies in both
the Active and Defined Policy Sets.
Managing Secure Fabric OS
85