HP StorageWorks MSA 2/8 - SAN Switch User Manual page 57

To fail over the Primary FCS switch:
1. From a sectelnet or SSH session, log in as Admin to the Backup FCS switch
2. Enter the secfcsfailover command.
fcsswitchc:admin> secFCSfailover
This switch is about to become the Primary FCS switch.
All transactions of the current Primary FCS switch will be aborted.
ARE YOU SURE (yes, y, no, n): [no] y
WARNING!!!
The FCS policy of Active and Defined Policy sets have been changed.
Review them before you issue secPolicyActivate again.
fcsswitchc:admin>
fcsswitchc:admin> secPolicyshow "active","FCS_POLICY"
____________________________________________________
ACTIVE POLICY SET
FCS_POLICY
Pos Primary
__________________________________________________
1 Yes
2 No
3 No
fcsswitchc:admin>
fcsswitcha:admin> secPolicyshow "active","FCS_POLICY"
____________________________________________________
ACTIVE POLICY SET
FCS_POLICY
Pos Primary
__________________________________________________
1 Yes
2 No
3 No
fcsswitcha:admin> logout
Secure Fabric OS Version 1.0 User Guide
that you want to designate as the new Primary FCS switch.
The Backup FCS switch becomes the new Primary FCS switch, and the FCS
policy is modified so that the new and previous Primary FCS switches have
exchanged places.
For a sample CLI session, see the example provided on the following page.
Entering secfcsfailover from the Backup FCS switch "fcsswitchc",
then secpolicyshow:
WWN
10:00:00:00:00:00:33:3c
10:00:00:00:00:00:11:1c
10:00:00:00:00:00:22:2c
Entering secpolicyshow from the current Primary FCS switch,
"fcsswitcha":
WWN
10:00:00:00:00:00:11:1c
10:00:00:00:00:00:22:2c
10:00:00:00:00:00:33:3c
Creating Secure Fabric OS Policies
DId swName
3 fcsswitchc
1 fcsswitcha
2 fcsswitchb
DId swName.
1 fcsswitcha
2 fcsswitchb
3 fcsswitchc
57