Secure Fabric Os Commands - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Secure Fabric OS Commands and Secure Mode Restrictions

Secure Fabric OS Commands

You can use the Secure Fabric OS commands to:
Most Secure Fabric OS commands must be executed on the Primary FCS switch
when Secure Mode is enabled. For a list of restricted commands, see
Restrictions in Secure
Table 19
Table 19: Secure Fabric OS Commands
Command
pkicreate
pkiremove
pkishow
secfabricshow
secfcsfailover
sechelp
114
Enable and disable Secure Mode
Fail over the Primary FCS switch
Create and modify Secure Fabric OS policies
View all Secure Fabric OS-related information
Modify passwords
Create and remove temporary passwords
View and reset Secure Fabric OS statistics
View and reset version stamp information
Mode" on page 117.
lists all the commands available for managing Secure Fabric OS.
Re-creates the PKI objects on the switch. See
"Re-creating PKI Objects If
Removes the PKI objects from the switch.
Displays the status of the PKI objects and digital
certificate on the switch. See
the Digital Certificates" on page 38.
Displays Secure Fabric OS-related fabric information.
See "Displaying General Secure Fabric OS Information
About a Fabric" on page 84.
Transfers the role of the Primary FCS switch to the next
switch in the FCS policy. See
FCS Switch" on page 56.
Displays a list of Secure Fabric OS commands. To use,
enter the sechelp command at the CLI prompt.
Description
Required" on page 39.
"Verifying Installation of
"Failing over the Primary
Secure Fabric OS Version 1.0 User Guide
"Command
Available
when
Secure
Mode is
Disabled?
No
No
Yes
No
No
Yes