Installing A Supported Cli Client On A Computer Workstation - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Installing a Supported CLI Client on a Computer Workstation

Standard telnet sessions work only until Secure Mode is enabled. Once Secure
Mode is enabled, you can use the following telnet clients:
Sectelnet is provided on the HP website and is also available in the public domain.
It can be used as soon as a digital certificate is installed on the switch.
To install the sectelnet client on a Solaris workstation:
1. Obtain the Solaris version of the sectelnet file from HP and copy the file onto
2. Decompress the tar file and install it to a location that is known to the
To install the sectelnet client on a PC workstation:
1. Obtain the PC version of the sectelnet file from HP and copy the file onto the
2. Double-click the zipped file to decompress it.
3. Double-click the setup.exe file.
4. Install sectelnet.exe to a location that is known to the computer, such as in the
Secure Fabric OS Version 1.0 User Guide
Sectelnet—A secure form of telnet that is supported for switches running
Fabric OS v2.6.1, v3.1.x, or v4.1.x. For instructions on installing the sectelnet
client, see "Installing a Supported CLI Client on a Computer
page 45.
SSH—A secure form of telnet that is supported only for switches running
Fabric OS v4.1.x. Fabric OS v4.1.x supports any SSH client that supports
version 2 of the protocol (for example, PuTTy or F-Secure). Refer to the HP
StorageWorks Fabric Operating System Procedures Version 3.1.x/4.1.x User
Guide for client installation instructions.
the workstation computer.
computer, such as in the directory containing the standard telnet file. The
location must be defined in the path environmental variable.
Sectelnet is immediately available.
workstation computer.
directory containing telnet.exe. The location must be defined in the path
environmental variable.
Sectelnet.exe is available as soon as Setup completes.
Adding Secure Fabric OS to the Fabric
Workstation" on
45