HP StorageWorks MSA 2/8 - SAN Switch User Manual page 33

PKI CERTIFICATE INSTALLATION UTILITY 1.0.1
Enter the Path/file-name of the CSR output file to
(Note: an extension of '.xml' will be appended to
===>
5. Type the desired path and filename for the CSR file to be created, then enter
6. Enter y if you want to include licensed product data in the file. If not, enter
7. Enter y if you want to retrieve CSRs from all switches in the fabric, even
Note:
digital certificates, the same digital certificates will be provided again. This does not
cause a problem except for the time required to retrieve CSRs and load digital
certificates to a very large fabric.
PKI CERTIFICATE INSTALLATION UTILITY
Retrieving CSR's from 1 fabric(s)
1. Got a CSR for Switch: Name="U3_122", WWN="100000606980075c"
2. Got a CSR for Switch: Name="U3_123", WWN="100000606980075d"
Write CSRs to file:c:\security\nt_pki\CSRfile.xml
Success getting CSRs
Secure Fabric OS Version 1.0 User Guide
Example:
GET CERTIFICATE SIGNING REQUESTS
y if the address was entered correctly. If not, enter n and reenter the
address.
n.
those that already have digital certificates installed. Enter n if you only want
to retrieve CSRs from switches that do not already have a digital certificate.
If you retrieve CSRs and request digital certificates for switches that already have
The utility displays the success/failure of CSR retrieval.
Example:
& writing them to a CSR file.
Adding Secure Fabric OS to the Fabric
create.
your name)
33