Deleting A Policy; Aborting All Uncommitted Changes - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Creating Secure Fabric OS Policies

Deleting a Policy

If you delete a Secure Fabric OS policy, that aspect of the fabric becomes open to
all access.
To delete a Secure Fabric OS policy:
1. From a sectelnet or SSH session, log into the Primary FCS switch as Admin.
2. Enter the following:
3. If you want to implement the change immediately, enter the
Note:
primaryfcs:admin> secPolicyDelete "MS_POLICY"
About to delete policy MS_POLICY.
Are you sure (yes, y, no, n):[no] y
MS_POLICY has been deleted.
primaryfcs:admin>

Aborting All Uncommitted Changes

You can use the secpolicyabort command to abort all Secure Fabric OS
policy changes that have not yet been saved. This function can be performed only
from the Primary FCS switch.
To abort all unsaved changes:
1. From a sectelnet or SSH session, log into the Primary FCS switch as Admin.
2. Enter the secpolicyabort command.
80
secpolicydelete policy_name
Where policy_name is the name of the Secure Fabric OS policy.
secpolicyactivate command.
You cannot delete the FCS_POLICY.
Example:
All changes since the last time the secpolicysave or
secpolicyactivate commands were entered are aborted.
Secure Fabric OS Version 1.0 User Guide