Deactivating The Secure Fabric Os License On Each Switch - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Deactivating the Secure Fabric OS License on Each Switch

Deactivating the Secure Fabric OS license is not required in order to disable
Secure Fabric OS functionality.
Note:
the feature is not disabled until the next time the system is rebooted or a switch enable
or switch disable is performed.
To deactivate the software license:
1. Open a CLI connection (serial or telnet) to the switch.
2. Enter the licenseidshow command to display the Secure Fabric OS
3. Enter the following:
4. Repeat for each switch in the fabric.
switch:admin> licenseremove "1A1AaAaaaAAAA1a"
removing license-key "1A1AaAaaaAAAA1a"
Committing configuration...done.
For license to take effect, Please reboot switch now....
switch:admin>
Secure Fabric OS Version 1.0 User Guide
If the user installs and activates a feature licence and then removes the license,
license key.
licenseremove "key"
Where key is the license key, and is case sensitive. It can be copied from the
licenseshow output directly into the CLI.
Example:
Removing Secure Fabric OS Capability
125