Changing The Position Of A Switch Within The Fcs Policy - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Changing the Position of a Switch Within the FCS Policy

You can change the order in which switches are listed in the FCS policy using the
secpolicyfcsmove command. The list order determines which Backup FCS
switch becomes the Primary FCS switch if the current Primary FCS switch fails.
To modify the order of FCS switches:
1. From a sectelnet or SSH session, log into the Primary FCS switch as Admin.
2. Enter the following:
3. Enter the following:
Note:
operands.
Secure Fabric OS Version 1.0 User Guide
secpolicyshow "Defined", FCS_POLICY
This displays the WWNs of the current Primary FCS and Backup FCS
switches.
secpolicyfcsmove From, To
Where:
From is the position number of the FCS switch that you want to move.
To is the position to which you want to move the FCS switch.
You can also activate the command's interactive mode by entering it with no
Creating Secure Fabric OS Policies
55