Aborting A Secure Fabric Os Transaction - HP StorageWorks MSA 2/8 - SAN Switch User Manual

primaryfcs:admin> secPolicyAbort
Unsaved data has been aborted.
primaryfcs:admin>

Aborting a Secure Fabric OS Transaction

You can use the sectransabort command to abort a single Secure Fabric
OS transaction. This makes it possible to abort a transaction that has become
frozen due to a failed host (if a switch goes down, the transaction aborts by
default). This command cannot be used to abort an active transaction.
You can perform this function from any switch in the fabric.
To abort a Secure Fabric OS transaction:
1. From a sectelnet or SSH session, log into the Primary FCS switch as Admin.
2. Enter the sectransabort command.
primaryfcs:admin> secTransAbort
Transaction has been aborted.
primaryfcs:admin>
Secure Fabric OS Version 1.0 User Guide
Example:
Any Secure Fabric OS transaction that was in process is aborted (except for
the transaction of entering this command).
Example:
Creating Secure Fabric OS Policies
81