switch0:admin> tsclockserver "132.163.135.131"
switch:admin> tsclockserver
132.163.135.131
switch0:admin>
switch0:admin>login
login: admin
Password: xxxxxx
switch1:admin> tsclockserver "132.163.135.131"
switch1:admin> tsclockserver
132.163.135.131
switch1:admin>
6. Using the procedure described in
Note:
switches.
7. If the firmware was upgraded, perform the following steps:
Secure Fabric OS Version 1.0 User Guide
d. Repeat for the other logical switch.
Example:
OS and Zoning
Licenses" on page 25, ensure that both logical switches have:
An activated Secure Fabric OS license
An activated Zoning license
Only one license key is required to enable the same feature on both logical
a. Download and install the PKICERT utility on the computer workstation,
if not already installed, as described in
on page 30.
b. Use the PKICERT utility to create a file containing the CSRs of all the
switches in the fabric, as described in
Obtain the CSR
c. Obtain digital certificates from HP, as described in
Certificate
File" on page 34.
d. Use the PKICERT utility to load the certificates onto both logical
switches, as described in
Switches" on page 35.
"Verifying or Activating the Secure Fabric
File" on page 31.
"Distributing Digital Certificates to the
Adding Secure Fabric OS to the Fabric
"Installing the PKICERT
"Using the PKICERT Utility to
"Obtaining the Digital
Utility"
43
Need help?
Do you have a question about the StorageWorks MSA 2/8 - SAN Switch and is the answer not in the manual?