Attach Rails To The Vls300 (Appliance); Install Rails; Remove Slides From Rails - HP StorageWorks 300 - Virtual Library System EVA Gateway User Manual

Figure 1 Install rails
c.
Repeat these tasks for the rail on the other side of the rack.
3. Remove the inner slide rails from the outer slide rails. To do so, extend the inner slide rails from the
front of the rack until they lock in place. Then press the inner rail release latch (see
pull the inner slide rails straight out.
Figure 2 Remove slides from rails

Attach rails to the VLS300 (appliance)

To attach the rails to the appliance:
1.
Align the rail with the node so that the word "FRONT" on the rail is seen right-side-up and at the
front of the node.
26
Hardware installation
5201b
10685A
Figure 2) and