Configuration Commands; Cli Network Settings Configuration Commands - HP StorageWorks 300 - Virtual Library System EVA Gateway User Manual

Table 6 CLI network settings configuration commands
Command
showConfig
setConfigValue
<-tag> [value]
getDateTime
setDateTime
commitConfig
NOTE:
To reset a value to its default setting, set the option tag to " " (quoted space). For example:
fullhost=" "
The exception to this is the dhcp tag. DHCP is disabled by entering:
-dhcp=false
Any network configuration changes made using setConfigValue do not take effect until
"committed", using the commitConfig command.
Configuration commands
Use the CLI commands in to:
• Edit the FC host port settings
• Enable oversubscription and view oversubscription settings
• View LUN mapping
• Create, view, and destroy virtual libraries, tape drives, or cartridges
• Add, view, or remove barcode templates
Description
Lists host name, DNS domain name, DNS address, and various
other addresses. This command shows both the current internal
values, as well as the original values. It also lists the current and
new content of all files affected by the changes.
Sets the value of the corresponding configuration parameter. To
reset a value, enter " " (quoted space) as the value. More than
one tag and value can be set at a time. Where <-tag> can be:
-host - Host name (such as vlsexamp) (unqualified)
-domain - DNS domain name (such as xyz.com)
-fullhost - Fully qualified name (such as vlsexamp.xyz.com)
—ntpPrimary - First NTP Server Address
—ntpSecondary - Second NTP Server Address
-dnsaddr - DNS server address (replaces all addresses with
one line)
-dnsaddr1 - First DNS server address (cannot use with dnsaddr)
-dnsaddr2 - Second DNS server address (cannot use with
dnsaddr)
-dhcp - Has no value, indicates you want to configure the public
Ethernet connection using DHCP (reset is -dhcp=false)
-ipaddr - IP address of public Ethernet connection
-gate - Gateway to network (xx.xx.xx.x)
-mask - Netmask. Defaults to 255.255.255.0
Displays the day, date, time, time zone, and year (such as Mon
March 14 1 1:30:46 EST 2005)
-d<s> - Sets the date and time. Enter date and time in
yyyy-mm-dd hh:mm format (hh is 24 hour from 0).
Saves the system values changed using setConfigValue.
109
HP StorageWorks