Creating Cartridges; Create Virtual Library Wizard Window (7 Of 12) - HP StorageWorks 300 - Virtual Library System EVA Gateway User Manual

Figure 43 Create Virtual Library Wizard window (7 of 12)
9.
Choose one of the following options:
• To perform LUN mapping for the virtual tape drive, click Map LUNs and proceed to
mapping
• To create more tape drives, click Create More Tape Drives.
• To add cartridges to the virtual library, click Create Cartridges and proceed to
cartridges.
• To exit the wizard, click Cancel.
At this point the library and tape drives have been created, but the library does not contain
any cartridges. You can add cartridges later.

Creating cartridges

To add cartridges to a virtual library:
1.
If you are already in the Create Library Wizard window
The Cartridge Parameters window opens
2.
If not:
a. Click the System tab.
b. Select the virtual library in the navigation tree to which you are adding cartridges.
c.
Click Create Cartridge in the task bar.
The Cartridge Parameters window opens
for further instructions.
(Figure 43), click Create Cartridges.
(Figure 44).
(Figure 44).
LUN
Creating
77
HP StorageWorks