Table of Contents
Advertisement
To destroy a tape drive:
1.
Open a Command View VLS session and log in as the administrator. See
View VLS session from Command View
2.
Click the System tab.
3.
Select the tape drive in the navigation tree.
The tape drive details window opens
Figure 50 Tape drive details window
4.
Click Destroy Tape Drive in the task bar.
5.
Click Yes to confirm.
6.
Click Finish.
Destroying cartridges
CAUTION:
If you want to keep data that is currently on a cartridge that you are going to delete, copy the data to
another cartridge using a backup application before performing this task.
NOTE:
You cannot destroy a cartridge that is currently being accessed by a backup application.
To destroy cartridges:
1.
Open a Command View VLS session and log in as the administrator. See
View VLS session from Command View
2.
Click the System tab.
3.
Select Cartridges in the navigation tree.
The cartridges details window opens
82
Configuration
TL.
(Figure
50).
TL.
(Figure
51).
Opening a Command
Opening a Command
Advertisement
Table of Contents
