Add A Host Window - HP StorageWorks 300 - Virtual Library System EVA Gateway User Manual

a. Access Command View EVA.
b. From the Storage tab navigation tree, select the EVA storage system that will be used for the
VLS300, then Hosts.
c. In the status pane, click on Add Host to display the Add a Host screen.
d. Enter the Host name (preferably the VLS hostname), enter or select one of the WWPNs (noted
in the previous step) in the Port WW Name box on the VLS300, and select Linux for the Host
OS (Figure 15).
NOTE:
If a WWPN is not in the Port WW Name box, there may be a zoning error. After
creating the host entries, verify that your zoning is correctly configured.
Figure 15 Add a Host window
e.
Click on Add Host.
f.
From the Storage tab navigation tree, select the host you just added.
g. Click on the Ports tab in the status pane.
h. Click on Add port, select one of the VLS300 WWPNs (noted in the previous step) from the
pull-down list or type one of the appropriate WWPNs, then click Add port
38
Storage configuration
(Figure 16).