Table of Contents
Advertisement
Edit the E-mail settings
E-mail notification is sent to the persons you include on the E-mail distribution list in the E-mail settings.
You specify the E-mail notification alert severity and format settings for each person on the distribution list.
To create an E-mail distribution list for notification alerts, add an E-mail address to the list, or remove an
E-mail address from the list:
1.
Log in to Command View VLS as the administrator. See
from Command View
2.
Click the Notifications tab.
The Notifications window displays
3.
Click Edit Email Settings in the task bar.
The Edit Email Settings window opens
Figure 68 Edit Email Settings window
4.
To add an E-mail address:
a. Enter an E-mail address in the Email Address box.
b. Select the type of notification alerts to send in the Alerts box.
• All—Sends all notifications
• Errors—Sends only errors
• Warnings—Sends only warnings
• None—Sends no notifications
c.
Select a notification alert format in the Format box.
• Short—Sends short mail messages
• Long—Sends detailed mail messages
• Long + Attachment—Sends detailed mail messages and relevant log files
• Configuration—Saves the VLS configuration and E-mails it at midnight after any
configuration change.
d. Click Add.
e.
To add another E-mail address, repeat these steps.
5.
To delete an E-mail address, click the Remove button for the E-mail address.
6.
To test an E-mail address entry, click Test Email.
TL.
(Figure
66).
(Figure
Opening a Command View VLS session
68).
103
HP StorageWorks
Advertisement
Table of Contents
