HP StorageWorks 300 - Virtual Library System EVA Gateway User Manual page 124

System board LED Internal Health
and color LED Color
Processor failure, Red
socket X (Amber)
Amber
Processor failure, Red
both sockets (Amber)
PPM failure (Amber) Red
DIMM failure, slot X Red
(Amber)
Amber
DIMM failure, all Red
slots in one bank
(Amber)
Overtemperature
Amber
(Amber)
Red
Riser interlock Red
(Amber)
Online spare Amber
memory (Amber)
Power converter
Red
module interlock
(Amber)
Fan module (Amber) Amber
Fan module (Red) Red
Power supply signal Red
interlock (Amber)
124
Component identification
Status
One or more of the following conditions
may exist:
• Processor in socket X has failed.
• Processor in socket X failed over to
the offline spare.
• Processor X is not installed in the
socket.
• Processor X is unsupported.
• ROM detects a failed processor
during POST.
Processor in socket X is in a pre-failure
condition.
Processor types are mismatched.
PPM has failed.
• DIMM in slot X has failed.
• DIMM in slot X is an unsupported
type, and no valid memory exists in
another bank.
• DIMM in slot X has reached single-bit
correctable error threshold.
• DIMM in slot X is in a pre-failure
condition.
• DIMM in slot X is an unsupported
type, but valid memory exists in
another bank.
No valid or usable memory is installed
in the system.
The Health Driver has detected a
cautionary temperature level.
The node has detected a hardware
critical temperature level.
The PCI riser board assembly is not
seated.
Bank X failed over to the online spare
memory bank.
The power converter module is not
seated.
A redundant fan has failed.
The minimum fan requirements are not
being met in one or more of the fan
modules. One or more fans have failed
or are missing.
The power supply signal cable is not
connected to the system board.