Table of Contents
Advertisement
8 Management
This section details the VLS management procedures. It is comprised of the following topics:
• Changing the account passwords
• Managing high availability
• Managing cartridges
• Unloading a cartridge from a drive
• Freeing up storage space
• Restarting the VLS device emulations
• Updating the software
• Saving configuration settings
Changing the account passwords
To change the administrator and/or user account password:
1.
Open a Command View VLS session and log in as the administrator. See
View VLS session from Command View
2.
On the System tab, select Chassis from the navigation tree.
3.
Click Edit Accounts under Maintenance Tasks.
The Edit Accounts window opens
Figure 54 Edit Accounts window
4.
Enter the current password in the Old Password box. The password is case sensitive.
5.
Enter a new password in the New Password box.
6.
Enter the new password again in the Retype New Password box.
7.
Click Apply Settings.
Command View VLS restarts automatically.
TL.
(Figure
54).
Opening a Command
HP StorageWorks
87
Advertisement
Table of Contents
