Table of Contents
Advertisement
To open a secure shell session:
1.
Open a secure shell session to the VLS using a secure shell program (such as PuTTY) or by entering:
ssh <fully qualified name of the VLS> and then press Enter.
2.
At the Login as: prompt, enter administrator and then press Enter.
3.
At the Password: prompt, enter the administrator password and then press Enter.
The default administrator password is admin.
Closing a secure shell session
To close a secure shell session:
Enter logout, done, quit, bye, or exit and then press Enter.
Opening a serial session
To open a serial session:
1.
Connect a PC or workstation to the serial connector on the rear of node 0 of the VLS using the
null-modem (serial) cable provided. See
2.
Establish a CLI session using a terminal emulation program, such as Windows Hyperterminal.
3.
Enter administrator or emergency for username.
4.
Enter the password for the username entered.
The default administrator password is admin. The emergency login password is repair.
NOTE:
Logging in as administrator or using the emergency login gives you full privileges to all VLS
functions available through the CLI command set.
Closing a serial session
To close a serial session, click Logout at the top of the Console Manager window. This logs you out of the
Console Manager and displays the Logon window.
Rear panel
components.
59
HP StorageWorks
Advertisement
Table of Contents
