Opening A Command View Vls Session From A Web Browser; Command View Vls Login Window - HP StorageWorks 300 - Virtual Library System EVA Gateway User Manual

Opening a Command View VLS session from a web browser

NOTE:
Before you can open a Command View VLS session, you must set the VLS network settings. See
Setting the network
To open a Command View VLS session from a web browser:
1.
Launch a web browser.
2.
In the web browser URL box, enter:
https://<fully qualified name of the VLS>
NOTE:
Entering "http://<fully qualified name>" instead of the above URL
automatically redirects you to the secure "https://<fully qualified name>"
connection. All communications are over a secure connection.
3.
If a Security Alert window opens and prompts you to accept the Secure Sockets Layer (SSL) certificate,
install the SSL certificate as described in
The first time you open a Command View VLS session (and the first time you open a Command View
VLS session after changing the fully qualified name of the VLS), a Security Alert window opens and
prompts you to accept the Secure Sockets Layer (SSL) certificate.
Figure 24 Command View VLS login window
4. Enter administrator or user in the Username box. The username is case sensitive.
NOTE:
Logging in as administrator gives you full privileges to all VLS functions available
through Command View VLS. Logging in as a user gives you only viewing and cartridge
management privileges.
5. Enter the appropriate password in the Password box for the username entered.
settings.
Installing the SSL certificate into your web browser.
53
HP StorageWorks