Table of Contents
Advertisement
Figure 52 Cartridges parameters window
6.
Select the Select box next to each cartridge that you want to delete. Select Select All if you want to
destroy all the cartridges listed.
7.
Click Destroy Selected.
8.
Click Yes to confirm.
9.
Click Finish.
NOTE:
Barcode numbers assigned to cartridges that have been destroyed can be reused. To reuse a barcode
number, do one of the following:
Create a new barcode template with the appropriate values to use the barcode number(s).
•
•
Delete the barcode template used to create the original cartridge(s), and then recreate the barcode
template with the appropriate values to use the barcode number(s).
Adding and removing barcode templates
You can add and remove (delete), but not edit, cartridge barcode templates at any time.
NOTE:
Deleting a barcode template does not affect the cartridges that were created using it.
To add or delete a barcode template:
1.
Open a Command View VLS session and log in as the administrator. See
View VLS session from Command View
84
Configuration
TL.
Opening a Command
Advertisement
Table of Contents
