HP StorageWorks 300 - Virtual Library System EVA Gateway User Manual page 146

NOTE:
The VLS operating system contains all the hardware device drivers, firmware, and utilities required to
operate the VLS.
To re-install the operating system:
1. Connect a keyboard to the keyboard connector. See
2. Connect a monitor to the video connector. See
3. Insert the VLS Quick Restore CD into the CD-ROM or DVD-CD drive.
The VLS Quick Restore CD auto starts.
4.
Press R on the keyboard to start the re-installation.
The re-installation takes 30 minutes or less to complete. The screen may freeze during the last 10
minutes of the re-installation. This is normal.
The VLS Quick Restore CD is ejected and the system reboots when the re-installation is complete.
5.
When restoring the primary node, restore the configuration settings. See
settings.
6. When restoring the primary node, if one or more capacity licenses had been added to the VLS,
re-install the VLS capacity license(s). See
Disaster recovery
146
Rear panel components.
Rear panel components.
Re-installing the VLS capacity
Restoring the configuration
licenses.