Table of Contents
Advertisement
NOTE:
Do not format the LUNs when manually creating previously existing pools after
performing a disaster recovery of the primary node. If you do not format the LUN, all
cartridge data in that pool is retained.
f.
Click Finish to add the LUNs to the pool.
The pool is now ready to have cartridges created.
NOTE:
If you created storage pools on a LUN that already contained cartridges, update the Allocated Capacity
numbers. To do this, select Cartridges from the system navigation pane, then select View for the All listing.
Destroying storage pools
Command View VLS allows you to destroy a specific storage pool or all storage pools.
NOTE:
If there are cartridges in the pool or pools when they are destroyed, emulations will restart. To avoid this
restart, delete all cartridges from the pool prior to deleting the pool. (see
To delete a single storage pool:
1.
Open a Command View VLS session and log in as the administrator. See
View VLS session from Command View
2.
In the Storage tab navigation tree, select the pool to delete (listed under Storage Pools).
3.
From the task bar, select Destroy Storage Pool. The Confirm Destroy <storagepool name>
window is displayed
Figure 20 Confirm Destroy Storage Pool window
4.
Select Next to destroy the pool.
44
Storage configuration
TL.
(Figure
20).
Destroying
cartridges).
Opening a Command
Advertisement
Table of Contents
