Table 8 CLI management commands
Command
changePassword
editCartridge
restartEmulations
restartCommandViewVLS
restartSystem
shutdownSystem
saveAllConfig
restoreAllConfig
1
<s> = string; <n> = number; <f> = filename
Monitoring commands
Use the CLI commands in to:
•
View the VLS health status
Usage
1
Reset the administrative password, or change the
administrative or user password. Command View VLS
automatically restarts after changing the password(s) to
make the changes take effect. Where the options are:
-admin - Reset the administrator password ( -u and
-p are ignored) (optional)
-p - Password (no spaces) (optional)
-u - Username (administrator or user). Default is
current user. (optional)
-h - Displays command usage information (optional)
Change an existing cartridge parameters. Where the
options are:
-a <s> - VLS filename of the cartridge (required)
-b <s> - Barcode label of the cartridge (required)
-c <n> - Current capacity of the cartridge in
gigabytes (optional). Only required if changing the
cartridge capacity.
-l <s> - Name of library in which the cartridge
resides (Library_0, ...) (required)
-nc <n> - Desired new capacity of the cartridge in
gigabytes (optional)
-nl <s> - Name of the new library if moving
cartridge (Library_1, ..) (optional)
-w - Write protect? (0-read/write or 1-read only)
(optional)
-y <n> - Cartridge emulation type (2, 3, ...)
(required)
-h - Displays command usage information (optional)
Restarts the VLS device emulations.
Restarts Command View VLS.
Shuts down and restarts the VLS node.
Shuts down the VLS node so it can be powered off.
Where the options are:
-o <s> - Saves the VLS virtual library configuration
and network settings to the specified external
configuration file.
-h - Displays command usage information (optional)
Where the options are:
-in <s> - Restores the VLS virtual library configuration
and network settings from the specified external
configuration file.
-h - Displays command usage information (optional)
1 15
HP StorageWorks
Need help?
Do you have a question about the StorageWorks 300 - Virtual Library System EVA Gateway and is the answer not in the manual?
Questions and answers